LaundryLens

Самообучающийся адаптер ioBroker для автоматического определения циклов стирки и сушки с помощью измерения мощности интеллектуальной розетки. Распознает запущенные программы, оценивает оставшееся время и отправляет уведомления в Telegram – полностью локально, без облачных сервисов.

Альфа-версия. Протестировано на стиральных и сушильных машинах Siemens iQ. Для других марок и моделей может потребоваться доработка. Будем рады отзывам.

Как это работает

LaundryLens записывает кривую энергопотребления каждого цикла и сравнивает её с сохраненными профилями программ, используя корреляцию с учетом сегментов и алгоритм DTW-lite. Достоверность результатов накапливается в течение нескольких раундов сопоставления, прежде чем программа будет принята, что предотвращает срабатывание ошибочного сопоставления из-за отдельных выбросов. Оставшееся время оценивается динамически на основе как прошедшего времени, так и текущего энергопотребления, а не только фиксированного среднего значения.

Адаптер самообучающийся: предустановленных профилей нет. Каждая программа обучается на вашем конкретном устройстве. Распознавание улучшается с каждым завершенным циклом.

Функции

• Обнаружение циклов с помощью конечного автомата (ВЫКЛ → НАЧАЛО → РАБОТА ↔ ПАУЗА → ЗАВЕРШЕНИЕ)
• Сопоставление программ самообучения (взвешенная по сегментам корреляция + разрешение дизлайков с помощью DTW)
• Накопление баллов в нескольких раундах с учетом пороговых значений достоверности, специфичных для каждого устройства.
• Блокировка отмены: программы, выбранные вручную, не перезаписываются фоновым сопоставлением.
• Адаптивная оценка оставшегося времени, сочетающая сигналы, основанные на времени и скорости потребления энергии.
• Административный интерфейс с расширяемым списком циклов, встроенным графиком мощности (холст), легендой фаз, обрезкой и разделением по касанию/перетаскиванию.
  • Именно поэтому адаптер поставляется с пользовательской вкладкой администратора (admin/tab_m.html Вместо того чтобы полагаться на jsonConfig или стандартный компонент Диспетчера устройств: ни один из них не поддерживает отображение интерактивной кривой мощности для каждого цикла, редактирование границ фаз касанием/перетаскиванием или разделение/обрезку записанной трассировки — все это является основой повседневного использования LaundryLens (просмотр фактического выполнения цикла, исправление несоответствий, создание новых профилей программ на основе трассировки).
• Уведомления в Telegram с настраиваемыми порогами обновления, заполнителями ({progress}, {prevTime}, {state:objectId} для любой точки данных ioBroker) и условных текстовых блоков
• Также поддерживает Pushover, Signal, WhatsApp, Matrix, notify-my-android, Prowl и электронную почту (через ioBroker.email ) в качестве получателей уведомлений.
• Несколько устройств: один экземпляр на каждое устройство (стиральная машина, сушилка и т. д.).
• Локализованные, готовые к отображению текстовые данные (phaseText, stateText, programText) наряду с внутренними языково-нейтральными средствами, позволяющими сразу перейти к панели мониторинга VIS.

Требования

• ioBroker с js-контроллером ≥ 6.0.11
• Node.js ≥ 22
• «Умная» розетка или адаптер для измерителя мощности, предоставляющий данные о потребляемой мощности каждого устройства (например , Shelly EM ).

Установка

Установите LaundryLens через список адаптеров в административной панели ioBroker (вкладка "Адаптеры"), затем создайте отдельный экземпляр адаптера для каждого устройства и выберите точку данных "ватт" в конфигурации экземпляра.

Конфигурация

Каждый экземпляр имеет следующие настройки:

Настройки по умолчанию предназначены для устройств Siemens iQ. Порог обнаружения — это компромисс: чем ниже он, тем быстрее приходят уведомления, но тем выше риск ошибочных совпадений. Возможны некоторые эксперименты.

Количество точек данных на устройство

phase /state /program Они предназначены для автоматизации/скриптов и используют фиксированные, не зависящие от языка значения, которые никогда не меняются в зависимости от языка вашего ioBroker — используйте соответствующий параметр. *Text В качестве точки данных используйте другой подход, если хотите отображать статус непосредственно на панели мониторинга VIS без создания собственной таблицы переводов. Язык для phaseText /stateText /programText По умолчанию используется системный язык ioBroker, который можно переопределить для каждого устройства с помощью параметра "Язык отображения".

Использование точек данных в уведомлениях

Помимо встроенных заполнителей ({device}, {program}, {duration}, {energy}, {startTime}, {endTime}, {progress}, {prevTime} В шаблоне уведомления можно указать текущее значение любой точки данных ioBroker, используя следующие параметры:

{state:objectId}

Например, чтобы включить текущую температуру наружного воздуха и цену на электроэнергию в сообщение о завершении:

🧺 {device} done!
⏱️ Total runtime: {duration} min
🌡️ Outside: {state:0_userdata.0.outsideTemp}°C
💶 Price: {state:0_userdata.0.electricityPrice} ct/kWh

Это также работает внутри условного оператора. [...] блоки: [🌡️ Outside: {state:0_userdata.0.outsideTemp}°C] Если этот идентификатор объекта пуст или не существует, он полностью исчезает из сообщения, точно так же, как и в случае с пустым встроенным заполнителем. Отсутствующий или нечитаемый идентификатор объекта никогда не нарушает целостность сообщения — он просто преобразуется в ничто.

Советы для начинающих

• Перед тем как ожидать надежного обнаружения, дайте устройству поработать не менее 3–5 циклов на каждую программу.
• Начните с меньшего количества программ. Чем меньше профилей у вас будет, тем выше будет точность сопоставления.
• Используйте вкладку «Циклы» в административном интерфейсе, чтобы просмотреть прошлые циклы, удалить шум в начале/конце записанного трассировочного файла или разделить трассировочный файл, содержащий две программы.
• Перед любым обновлением воспользуйтесь функцией экспорта , чтобы создать резервную копию изученных профилей и истории циклов.

Вклад

Приветствуются сообщения об ошибках и запросы на изменение кода: Issues

Changelog

WORK IN PROGRESS

0.4.40 (2026-10-07)

• Fix: reported live (notification history showing a predicted finish time creeping from 12:30 to 14:06 over the course of a single wash cycle, while cycleProgress stayed roughly accurate - over an hour off by the end) - the predicted finish time could drift later and later with every update. Root cause: whenever the recent power trace's variance exceeds a threshold (e.g. a washer motor cycling on/off during agitation), the remaining-time estimate gets "locked" to the last trusted value, to avoid jumpy/unstable predictions from noisy readings. The locked value was a frozen millisecond duration though, which never shrank while locked - so the countdown effectively stopped entirely for as long as the noisy condition persisted, while real wall-clock time kept passing, making now + remaining (the predicted finish time) creep later and later
• Fixed by decrementing the locked value by the real elapsed time since it was last touched, instead of freezing it as a constant - it now keeps counting down correctly even while locked, while still avoiding jumpy re-estimates from noisy readings (the original intent)
• Covered by a new regression test extending tests/test_time_estimate.js

0.4.39 (2026-10-06)

• Fix: reported live - elapsedTime stayed frozen (often at a stale value left over from a previous cycle) for the entire "detecting..." period of a new cycle, only starting to update once a program was actually confirmed (observed: stuck at 11342 while only ~15 minutes into a new washer cycle; for a dryer, jumped from frozen to 1096 the moment the program was recognized). Root cause: elapsedTime is just Date.now() minus the cycle's start time, with no real dependency on program detection - but the onTimeUpdate callback that wrote it (via _onTime()) returned early, skipping the write entirely, whenever WashDataManager._updateTimeEstimate() reported no program/bestCandidate yet
• Fixed by extracting the computation into a shared _updateElapsedTime() helper, now called unconditionally at the top of onTimeUpdate - before its "no program detected" early return - as well as from _onTime()'s normal path, so it updates from the moment a cycle starts running regardless of detection status
• Covered by a new regression test (tests/test_elapsed_time_before_detection.js)

0.4.38 (2026-10-04)

• New: the Lernkontrolle (learning review/feedback) flow can now be driven from a VIS dashboard, not just the admin tab - previously only reachable via sendTo commands, invisible to VIS, which can only read/write data points
• New read-only data points: pendingFeedbackCount, pendingFeedback (JSON array of all unconfirmed cycles, oldest first), and feedbackCycleId/feedbackProgram/feedbackDuration/feedbackEnergy/feedbackConfidence (convenience fields for the oldest pending cycle, so a simple VIS text widget doesn't need to parse JSON)
• New writable actions, each acting on the oldest pending cycle: feedbackConfirm (button - same as the admin tab's "Correct – confirm"), feedbackCorrectProgram (dropdown of program names, kept in sync the same way programOverride's own dropdown is - writing a name corrects and confirms, same as the admin tab's "Wrong program" flow), feedbackDelete (button - discards the cycle without confirming it)
• Covered by a new test file (tests/test_vis_feedback_actions.js, 17 cases) plus an extension to test_english_only.js's existing state/migration-coverage invariant check (the ten new state ids are brand new, so correctly added to the "nothing to migrate" allow-list rather than the migrations object)

0.4.37 (2026-10-03)

• Fix: three test files added in recent releases (test_show_probable_program.js, test_cycle_finish_exception_guard.js, test_cycle_boundary_reset.js) called the bare global setTimeout()/setInterval() directly in their fake-adapter mocks - the same mistake made and fixed before in other test files, missed again when writing these new ones. Brought in line with the native-timer-alias pattern used everywhere else in this suite (review checker E5004/E5005)
• Fix: @iobroker/testing devDependency bumped to ^6.3.0 (current; was ^6.2.2)

0.4.36 (2026-10-03)

• Fix: follow-up to 0.4.34's needsFeedback fix, reported live - deleting a cycle (e.g. an unconfirmed one someone just discards without confirming/correcting it first) could also leave needsFeedback stuck on true forever, since only confirmCycle/correctCycle had been covered. clearAllData and importConfig had the same gap (both can also replace cycleHistory/profiles wholesale). All three now also re-sync needsFeedback; clearAllData/importConfig additionally re-sync availablePrograms
• Covered by 3 new test cases extending tests/test_programs_and_feedback_sync.js

0.4.35 (2026-10-03)

• Fix: reported live - phaseText could get stuck showing an earlier phase (e.g. "Aufheizen"/heating) while phase had correctly moved on (e.g. to "dryer_drying"). Root cause: phase was already written on every _onTime() tick (which fires frequently throughout a running cycle), but phaseText (the human-readable, localized, emoji-carrying label) was only ever written in _onManagerState() - which only runs on actual state transitions (off/starting/running/paused/ending), not on every phase change within a single long "running" period. Both data points now update together on every tick
• Covered by a new regression test (tests/test_phase_text_tick_update.js)

0.4.34 (2026-10-02)

• Fix: reported live with screenshots - availablePrograms could show [] for a device that clearly had saved programs visible in the admin tab's own "Programme" list, while a second device correctly showed all of its programs. Root cause: the data point (and programOverride's dropdown states) was only ever written from five specific admin-tab actions (create/delete/rename a program, "clear all data") - never at startup, and never after a program got auto-learned from a confirmed cycle. A device whose programs were all auto-learned, with none of those five actions performed since the last restart, kept showing an empty list indefinitely even though profileStore had loaded the real programs from disk
• Fix: needsFeedback stayed false even with a cycle visibly pending confirmation in the admin tab's "Lernkontrolle" tab (complete with its own "1" badge). Root cause: the data point was declared in io-package.json but never actually written anywhere - the admin tab computes its own pending-cycle count entirely client-side (updateFeedbackBadge() in tab_m.html, counting cycles with !confirmed), so the data point itself never reflected it
• Both are now re-synced (a) unconditionally at the end of every device's startup, (b) after every finished cycle, and (c) - for needsFeedback - after a cycle is confirmed or corrected via the admin tab, mirroring the admin tab's own counting logic exactly

0.4.33 (2026-10-02)

• Fix: reported live with logs + a screenshot - a brand new cycle could show a leftover best-candidate guess from the previous, already-finished cycle for several minutes (e.g. "~30 Speed (76%)" right at the start of a new washing-machine cycle, matching exactly what the previous cycle had matched), before that new cycle's own matching had run even once. Root cause: _onDetectorState()'s STARTING case reset about a dozen per-cycle fields but not _bestCandidate, the field driving both the admin tab's live preview and, at the next confirmed transition, the persisted program/programText/confidence data points. The STARTING transition is now the single, authoritative reset point for every per-cycle field (also added the phase-tracking fields as defensive redundancy) - a new cycle can no longer show anything left over from the one before it
• Fix: cycleProgress stayed stuck at its last value (often 100%) after a cycle finished, instead of resetting to 0. The reset call reused _onTime(), which has a guard that only writes cycleProgress when progressPct > 0 (meant to ignore a brief non-match mid-cycle) - the deliberate reset-to-0 call was silently swallowed by that same guard. _onTime() now takes a forceWrite parameter that the reset call uses to bypass the guard
• Fix: an uncaught exception during cycle-finish post-processing (notably the post-hoc phase analysis that only washing machines/dishwashers run, more complex than the dryer's live phase tracking) could silently skip the onStateChange callback that keeps the state/stateText/running/program/phase data points in sync - the same class of bug as 0.4.31's dryer-specific case, but for any device type and any exception source. Now guarded with try/catch so a failure in post-processing can never block the state-sync callback
• New option "Show probable program before confirmation": off by default (unchanged behavior - program/programText show "detecting..." until a match is actually confirmed). When enabled, a live best-candidate guess reaching at least 40% confidence is shown immediately, prefixed with "≈" (e.g. "≈ 30 Speed"), updated continuously as confidence changes - not just the admin tab's own preview anymore, but the actual data points too
• New option "Text data points without emoji": off by default. When enabled, phaseText/stateText omit their emoji (e.g. "Washing" instead of "🫧 Washing") - useful for dashboards, text-to-speech, or anywhere emoji don't render usefully
• All four issues found via a live report (screenshots + debug logs) and fixed with full regression test coverage, including reverting each fix and confirming its test fails first

0.4.32 (2026-09-27)

• Fix: follow-up to 0.4.31 - a restart alone did not clear an already-stale state data point (e.g. stuck on "Running"), even with 0.4.31 installed. onReady() only re-wrote the state/stateText/running/program/phase data points when a restore branch fired (sensor currently drawing power, or a saved cycle needs resuming/finishing) - with neither true (the common case: an idle device whose last cycle already finished cleanly), nothing touched them at all, so a stale leftover value would survive any number of restarts
• Fixed by unconditionally re-syncing these data points with the manager's actual resolved state (manager.currentState/manager.getStatus()) at the end of every device's startup, regardless of which restore branch fired or didn't. Covered by a new source-inspection regression test (tests/test_startup_state_sync.js); also re-ran the full js-controller integration test since this touches onReady()
• If you're still seeing a stuck status after installing 0.4.31: this release should finally clear it on the next restart

0.4.31 (2026-09-27)

• Fix: reported live - the admin tab showed the dryer as off while the state data point still read "Running". Root cause: the dryer's anti-crease "power drop" quick-finish path (WashDataManager.processPowerReading() - force-ends a cycle 45s after a sudden power drop, to react faster than waiting for the full off-delay) set the in-memory state to off directly and called the internal _onCycleFinished(), but - unlike the normal _onDetectorState() OFF transition - never invoked the onStateChange callback afterwards. That callback is what main.js's _onManagerState() uses to write the state/stateText/running/program/programText/phase/phaseText data points, so they stayed frozen on their last value from before the drop even though the live status the admin tab reads (WashDataManager._buildStatus() via getStatus) was already correct. lastCycle/lastCycleProgram/etc. were unaffected (a separate callback), which is why cycle history looked fine while only the live status data points were stuck
• Fixed by firing onStateChange after the quick-finish, exactly as the normal end-of-cycle transition already does. Covered by a new regression test (tests/test_dryer_drop_finish_state_callback.js)
• If you're seeing the stuck-state symptom right now: restarting the adapter clears it immediately without waiting for the next cycle to start

0.4.30 (2026-09-27)

• Fix: removed the sinon devDependency again - it's already provided transitively via @iobroker/testing, so listing it directly was flagged as redundant by the review checker (E0063)
• Fix: tests/test_elapsed_time_unit.js's fake-adapter object (added in 0.4.29) made the same bare-global-timer mistake test_restart_resume_low_power.js had in 0.4.28 - reworked to use this suite's established native-setTimeout/setInterval alias pattern (E5004/E5005)
• 0.4.29 was tagged and pushed but never reached npm before this follow-up was needed, so its io-package.json news entry has been folded into this one rather than left dangling (the review checker's E2004 flags any news entry for a version npm doesn't have)
• Found via the second ioBroker.repositories manual review pass (PR #6459) on 0.4.29

0.4.29 (2026-09-27)

• Fix: elapsedTime declares role value.interval, which requires its value in seconds - but it was computed and stored in minutes everywhere: the state definition's unit, the one-time migration for existing installs, main.js's periodic update, and the live snapshot the admin tab reads via getStatus/WashDataManager._buildStatus(). All four now consistently use seconds, matching timeRemaining/totalDuration. Covered by a new regression test (tests/test_elapsed_time_unit.js)
• Fix: added sinon as an explicit devDependency - several existing tests already require("sinon") directly, but it was missing from package.json (a phantom dependency the repository checker had flagged back when this adapter was first submitted)
• Both found via the ioBroker.repositories manual review pass on 0.4.27/0.4.28 (PR #6459); the elapsedTime unit mismatch had previously been marked "ignore for now" by the reviewer before being flagged again in a later pass

0.4.28 (2026-09-27)

• Fix: @iobroker/testing devDependency bumped to ^6.2.2 (the review checker's required minimum; was ^6.1.0)
• Fix: the GitHub noreply author email (backfisch88@users.noreply.github.com), rejected by the repository review checker, replaced with a real contact address in package.json, io-package.json and the README.md/LICENSE copyright lines
• Fix: tests/test_restart_resume_low_power.js's fake-adapter object called the bare global setTimeout/setInterval directly, which the review checker's plain-timer-usage check flags; reworked to use the same native-timer-alias pattern already used by every other test file in this suite. The mock's job is unchanged - it still just forwards to the real timer under the adapter.setTimeout/adapter.setInterval name
• Found via the first ioBroker.repositories manual review pass (PR #6459) on 0.4.27

0.4.27 (2026-09-25)

• Fix: the notification-target dropdown in the admin tab showed a hardcoded German placeholder ("Alle (broadcast)") for every notification adapter except Telegram/email, regardless of the configured system language - for Telegram this got overwritten a moment later once the user list loaded, but for Pushover/Signal/WhatsApp/Matrix/notify-my-android/Prowl it was never replaced. Now uses the existing translation everywhere
• Fix: a Telegram user's display name (settable by anyone who messages the configured bot) was written into the admin tab's dropdown options via unescaped string concatenation - a stored-XSS-style risk in the admin UI. Now HTML-escaped before insertion
• Found via a repository-quality review of the admin tab; both are covered by new regression tests

0.4.26 (2026-09-25)

• Fix: a program correctly detected early in a cycle (confirmed via score accumulation, which can land as low as 60% confidence) could later revert to "detecting..." near the end if it was never boosted by locking - the protection against this (locking a confirmed program so a later run of unmatched readings can't wipe it) used to only activate if some individual reading also happened to reach 75% confidence on its own. Now it activates immediately on every confirmation, regardless of the confirming confidence. Confirmed against a real log: a wash cycle's program was correctly detected at 68.4% at 07:31, then a ~90-minute stretch of "no match" readings (bestCandidate still consistently the same program, just below the 55% match threshold) would have reverted it before this fix. A high-confidence, persistent override to a genuinely different program remains possible and unaffected

0.4.25 (2026-09-23)

• New: full per-phase duration learning model for remaining-time estimation. Each program now learns not just its overall duration, but how long each individual phase (heating, washing, spinning, dryer_drying, cooling, ...) typically takes, and in what order. Once at least 3 confirmed cycles have data for the current phase, remaining time is estimated as "time left in the current phase, plus the typical duration of every phase that historically follows it" - far more accurate near the end of a cycle than a single whole-cycle average, especially for a phase (like a dryer's main drying phase) whose position relative to total cycle length varies a lot between runs. Automatically falls back to the 0.4.24 time/energy blend until enough phase data exists

0.4.24 (2026-09-23)

• Improved remaining-time/progress accuracy, especially for the dryer: each program now also learns its historical duration variance (durationCV) - a dryer's drying time depends heavily on load size/dampness, so it naturally varies far more than a fixed-temperature wash. The remaining-time estimate now leans more on the live energy-consumption pace for programs known to vary a lot, and more on the historical time average for consistent ones
• Fix: the reported progress percentage is now derived from the same blended remaining-time estimate instead of a separate pure elapsed-time ratio, so "Fortschritt" and the predicted finish time can no longer disagree with each other
• Added a remaining-time cap for the dryer's short "cooling" phase, matching the washer's existing "spinning" cap

0.4.23 (2026-09-16)

• Fix: a cycle interrupted by an ioBroker restart while the device's power had already returned to idle was silently orphaned - the on-startup restore logic only handled the case where power was still high at restart, so the manager just reinitialized to "off" without ever properly finishing the interrupted cycle, leaving it stuck showing "running" with stale pre-restart values forever. Combined with the offDelayMin fix in 0.4.22, this should resolve "cycle never ends" reports after a mid/post-cycle adapter restart

0.4.22 (2026-09-16)

• Fix: the per-device "Off delay" setting (offDelayMin) was silently ignored - CycleDetector's config merge never translated it into the field the detector actually uses (offDelay, in seconds), so every device always used a hardcoded 5-minute default regardless of what was configured. Found via a real trace where a cycle stayed stuck as "running" long after power had genuinely dropped to ~0W. Note: this alone doesn't fully explain very long stalls (well over an hour) - if a cycle still gets stuck after this fix, please share the adapter log from around that time

0.4.21 (2026-09-08)

• Fix: translated all remaining German user-visible strings in the admin tab (toasts, table headers, confirm dialogs - about 35 instances, more than initially found by review) into the existing i18n system
• Fix: a cycle's matchedProfile could be stored server-side as literal German text ("Anti-Knitter") for anti-crease-tagged cycles, showing up untranslated in the lastCycleProgram data point and cycle history regardless of system language - now stored as a language-neutral marker and translated at display time
• Fix: two remaining hardcoded German date/time locales in the admin tab now use the configured language like everywhere else
• Fix: added the full MIT license text to README.md (previously only the header/copyright line)
• Extended the English-only regression test to also cover the admin tab, closing the gap that let these issues go unnoticed for several releases

0.4.20 (2026-09-08)

• Fix: added Node.js 26 to the CI test matrix (unit-tests and adapter-tests)
• Fix: updated the @iobroker/testing devDependency to 6.1.0 - checked both 6.0.0's and 6.1.0's breaking changes against this adapter (no prepare script, no encryptedNative properties, no changeAdapterConfig() usage in the integration test - none apply); full test suite, test:package, and test:integration all still pass

0.4.19 (2026-09-05)

• Fix: use node:-prefixed built-in module imports (node:fs, node:path) consistently everywhere (lib/displayLabels.js, test/integration.js, test/package.js), not just in main.js
• Fix: updated @iobroker/adapter-core to the currently required minimum version (3.4.3)
• Fix: three incomplete Dutch/Polish/Ukrainian changelog translations for 0.4.12 that were noticeably shorter than the English original

0.4.18 (2026-09-02)

• Fix: the dryer anti-crease lock period (learned duration + a fixed 10-minute buffer) could expire while the dryer was still genuinely doing its anti-crease tumbling - real anti-crease duration varies cycle to cycle, so a fixed length occasionally ran out mid-tumble, letting the tail end trigger a false new-cycle detection. The lock now extends when a genuine tumble spike occurs near its expiry, capped at 90 minutes total from the beep

0.4.17 (2026-08-31)

• New: phaseText, stateText, programText data points - localized, ready-to-display versions of the existing language-neutral phase/state/program, useful for a VIS dashboard without building your own translation table
• New: "Display language" setting per device (defaults to the ioBroker system language)
• Internal: the phase-translation table (previously only in the admin tab, for the cycle graph legend) is now one shared file (admin/phaseLabels.json) used by both the admin UI and the new server-side data points, instead of two separately maintained copies
• Translated remaining German code comments to English (not a review/checker requirement - developer-only comments in German are explicitly permitted - done on request)
• Reorganized the README changelog: the current 0.4.x series stays here in full, the pre-0.4.0 beta history (0.2.2–0.3.0) moved entirely to CHANGELOG_OLD.md (previously one version, 0.2.5, existed with near-duplicate text in both places)

0.4.16 (2026-08-31)

• New: notification templates support a {state:objectId} placeholder that resolves any ioBroker data point's current value at send time (e.g. outside temperature, electricity price), in addition to the existing built-in placeholders. Works inside conditional [...] blocks too - a block hides itself if the referenced data point is empty
• Fix: a leftover German word ("Fertig") in the notification subject line

0.4.15 (2026-08-31)

• Fix: notification-language cache was module-level state (compact-mode leak risk between instances sharing a process) - moved to an instance field, same fix class already applied to ProfileStore's MIN_CONFIDENCE
• Fix: two devices accidentally sharing the same power sensor now log a warning instead of one silently losing updates
• Fix: durationTolerance/matchIntervalMin/matchPersist/offDelayMin normalization used a bare || default (same falsy-zero bug class fixed for other fields in 0.2.3) - aligned to the strict check
• Removed unused dead code (msgBlockTimer, never assigned anywhere)

0.4.14 (2026-08-30)

• Replaced the low-resolution 128x128 adapter icon with a new, sharper 256x256 version

0.4.13 (2026-08-27)

• Fix: the running state's name was still German ("Läuft") on existing installations, even though the code has said "Running" for a long time - it was missing from the state-name migration list added in 0.4.12 (found via a fresh object dump). Extended tests/test_english_only.js to check that every state id is covered by the migration, catching this kind of gap automatically going forward

0.4.12 (2026-08-26)

• Fix: all log messages and state names are now in English (found via the ioBroker.repositories manual review - PR #6459) - several were still German, including forceFinish/programOverride/lastMessage and others
• Fix: the forceFinish button state now correctly has read: false, matching the ioBroker role specification for role: "button"
• Fix: existing installations are automatically migrated to the corrected English state names on next start (setObjectNotExistsAsync never updates an already-existing object, so a one-time migration step was needed)
• Fix: running multiple devices on one adapter instance via native config's devices array was effectively impossible - the single configured device and the array were treated as mutually exclusive rather than combined. A dedicated admin UI for adding devices this way is still being worked on separately; for now, entries can be added by editing the instance's native config directly
• Docs: corrected the Requirements section (Node.js ≥ 22, js-controller ≥ 6.0.11 - it previously listed older, no-longer-enforced minimums), documented why the adapter ships a custom admin tab, and linked the recommended Shelly EM hardware

0.4.11 (2026-08-26)

• Fix: audited every remaining admin UI setting for the same class of bug fixed in 0.4.10 (a field silently never reaching the code that uses it) and found one more - "Notify also for probable program" (notifyOnProbable) was read via the device-config lookup but never included in what that lookup actually returns, so the checkbox had no effect
• Extended tests/test_manager_config_wiring.js to also check fields read directly off the device-config lookup (not just fields passed into WashDataManager), so this class of bug should be caught automatically going forward

0.4.10 (2026-08-26)

• Fix: found the actual root cause of the anti-crease false-restart bug (0.4.9 only clarified the checkbox wording) - main.js built the config object passed into WashDataManager field-by-field, and ignoreAntiKnitter was missing from that list entirely, so the lock-out protection could never activate regardless of the checkbox or a saved reference pattern
• Fix: found and fixed two more settings silently broken by the exact same kind of omission, which likewise never took effect no matter what was configured: "Program detection threshold (%)" (matchThreshold) and "Instant adoption from confidence (%)" (instantConfirmThreshold)
• Added a regression test (tests/test_manager_config_wiring.js) that checks every setting WashDataManager reads is actually passed through from main.js, to catch this class of bug in the future

0.4.9 (2026-08-24)

• Fix: on dryers, anti-crease tumbling after the beep could be mistaken for the start of a new cycle even when a reference pattern had been recorded, because the lock-out protection was tied to the "Ignore saved anti-crease pattern" checkbox rather than to whether a pattern actually exists - clarified the checkbox's label/help text (was easy to read backwards) and added a hint after saving a pattern if that checkbox still needs to be switched off

0.4.8 (2026-08-16)

• No functional changes. Migrated admin/i18n to the short-format file structure (i18n/<lang>.json instead of i18n/<lang>/translations.json) via npm run translate convert - repository checker suggestion S5601

0.4.7 (2026-08-16)

• Fix: on devices going through the generic phase-history branch (currently dryers), recorded phase timestamps could show wildly wrong values (often large negative numbers, e.g. from days-old previous cycles) because the internal phase-history buffer was never cleared between cycles - found via a production object-structure dump during the "add to latest" review
• Fix: repository checker finding - invalid state role "value.percent" on cycleProgress (not a valid ioBroker role), corrected to "value"

0.4.6 (2026-08-16)

• No functional changes. Switched npm publishing to Trusted Publishing (OIDC) so releases are signed with provenance (repository checker E2008)

0.4.5 (2026-08-08)

• Fix: a finished cycle could stay stuck showing "running" indefinitely if the power sensor stopped reporting after settling at a flat value (many sensors, incl. Shelly, only report on change) - the state machine is now re-evaluated periodically (heartbeat) so it can still finish on schedule
• Fix: repository checker findings from issue #39 (real test:package validation instead of a no-op stub, corrected adminUI.tab/materializeTab config, responsive jsonConfig.json layout, various CI/tooling fixes)
• (copilot) Adapter requires node.js >= 22 now
• (ioBroker-Bot) Adapter requires js-controller >= 6.0.11 now.
• (ioBroker-Bot) Adapter requires admin >= 7.8.23 now.

0.4.1 (2026-07-30)

• Fix: ReferenceError: _suggestedApplied is not defined crashing the admin tab in some browsers/modes
• Fix: some Admin instances (especially the newer React-based rendering) showed a 404 "File tab.html not found" instead of loading the admin tab correctly - caused by an earlier cleanup that removed the materializeTab flag, which actually controls which filename (tab.html vs. tab_m.html) Admin resolves the custom tab to

0.4.0 (2026-07-30)

• New: full multilingual support - admin UI, notifications, and program phase names now translate automatically into 11 languages (en, de, ru, pt, nl, fr, it, es, pl, uk, zh-cn) based on the ioBroker system language
• New: all code comments translated to English, full compliance with the official @iobroker/eslint-config (formatting + JSDoc)
• Fix: the "All devices" status column and default notification templates weren't going through translation
• Infrastructure: CI no longer needs a committed package-lock.json; real integration test added; git history cleaned up
• Note: cycles recorded before this update show phases as an uncolored/unrecognized segment in the graph legend (the old German phase names no longer match the new internal phase keys) - purely cosmetic, only affects historical data

Older changelog entries (pre-0.4.0 beta history) can be found in CHANGELOG_OLD.md.

License

MIT License

Copyright (c) 2026 backfisch88 henrik.schoenhofen@icloud.com

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.